[Bldg-sim] Discomfort hrs

[Rob Hudson]

If there are more than one zone assigned to the PZS, then remove the
thermostats to the extra zones.  This happened to me when i attached an
unconditioned plenum space to a PZS space.

On Tue, Apr 6, 2010 at 10:52 AM, Vikram Sami <vssami at yahoo.com> wrote:

> Have you tried cycling your fans? If you'r doing this for ASHRAE compliance
> you need to do this anyway.
>
> --- On *Tue, 4/6/10, sambhav tiwari <tiwari.sambhav at gmail.com>* wrote:
>
>
> From: sambhav tiwari <tiwari.sambhav at gmail.com>
> Subject: [Bldg-sim] Discomfort hrs
> To: bldg-sim at lists.onebuilding.org
> Date: Tuesday, April 6, 2010, 2:33 AM
>
>
> Hi All,
>           In one of project my basline building was having packaged syngle
> zone system but after running i am getting lot of unmet hours for PSZ system
> for each zone almost 450 hrs for basline.
>
> Can any suggest some solution.
>
> Thanks
> Sambhav.
>
> -----Inline Attachment Follows-----
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG<http://us.mc656.mail.yahoo.com/mc/compose?to=BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG>
>
>
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Rob Hudson
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100406/6733ec48/attachment-0001.htm>