[Bldg-sim] VFD Chiller in EE4

Kyle Fridgen KFridgen at morrisonhershfield.com
Mon Dec 20 11:25:16 PST 2010


Correction - Appendix A of NRC's performance compliance supplement, not the modelling guide.

Regards,
Kyle

From: bldg-sim-bounces at lists.onebuilding.org [mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Kyle Fridgen
Sent: Monday, December 20, 2010 12:02 PM
To: Brian Tysoe; 'bldg-sim at lists.onebuilding.org'
Subject: Re: [Bldg-sim] VFD Chiller in EE4

I don't believe EE4's IPLV input does anything other than generate a warning message if you don't meet minimum efficiency.  Also there is no corresponding DOE input for IPLV.  To take advantage of better part load performance you'll have to edit the EIR-FPLR (electric input ratio as a function of the part load ratio) curve fit in DOE.  See appendix A of the EE4 modelling guide for the EE4/DOE default curves.

Hope this helps,
Kyle

From: bldg-sim-bounces at lists.onebuilding.org [mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Brian Tysoe
Sent: Monday, December 20, 2010 11:54 AM
To: 'bldg-sim at lists.onebuilding.org'
Subject: [Bldg-sim] VFD Chiller in EE4

Is there a way to take credit for using a VFD compressor on a chiller in EE4?

EE4 lets you define the chiller type, efficiency (COP), IPLV and capacity.

My VFD chiller has roughly the same COP at peak operation as my non-VFD chiller; however, the IPLV is much better because the performance at part load is more efficient. However, varying the IPLV of the chiller in EE4 does not appear to have any impact on the results whatsoever. Varying the COP affects things; however, varying the IPLV does not.

Thanks,


Brian Tysoe M.A.Sc., P.Eng., LEED AP
Mechanical Engineer

MCW Consultants Ltd. <http://www.mcw.com>
600-156 Front Street West
Toronto, ON M5J 2L6
Phone 416-598-2920
Fax 416-598-5394

This e-mail may be privileged and confidential. Any unauthorized use is strictly prohibited. If you received this e-mail in error, please contact the sender directly.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20101220/f2e45982/attachment-0002.htm>


More information about the Bldg-sim mailing list