[Bldg-sim] Hot Water Supply Temperature Reset in eQuest

weixiu kong weixiuk at yahoo.com
Fri Jan 22 13:25:59 PST 2010


Can anyone share some experience on how to reset hot water supply temperature as required in G3.1.3.4 of ASHRAE 90.1 - 2004 in eQuest? 

"Hot water supply temperature shall be reset based on outdoor dry bulb temperature using the following schedule: 180F at 20F and below, 150F at 50F and above and ramped linearly between 180F and 150F at temperature between 20F and 50F."

Thank you,

Weixiu Kong


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100122/94376f41/attachment.htm>


More information about the Bldg-sim mailing list