[Bldg-sim] Infiltration baseline for modeling
Paul Carey
paul at zed-uk.com
Thu Jan 14 15:14:36 PST 2010
Jim,
I would draw your attention to the following resources:
The Air Infiltration & Ventilation Centre (AIVC) - great set of reading
resources for this sort of stuff - my PhD and subsequent work has loads of
references that are held by their central library. http://www.aivc.org/
Also worth checking out the International Journal of Ventilation, useful
stuff there too: http://www.ijovent.org.uk/
Edited by essentially a who's who of ventilation research, it's an excellent
resource, albeit very academic based. Also has a useful online combined
natural & mechanical ventilation calculation tool :
http://phpaida.veetech.org.uk/phpaida.php
Also worth using the tables in the CIBSE Guide A.
Hope this helps.
Paul
cid:image001.jpg at 01CA48E6.60E6D920
Dr Paul Carey
BSc (Hons) PhD FRSA
Director
Low Carbon Energy Assessor
Zero Energy Design Ltd
10A Portland Place
2-22 Mottram Road
Stalybridge
SK15 3AD
T: +44 (0)161 3386200
F: +44 (0)0161 3031281
M: +44 (0)0789 4098012
E: paul at zed-uk.com
W: www.zed-uk.com
cid:image002.jpg at 01CA48E6.60E6D920
cid:image003.jpg at 01CA48E6.60E6D920
Certificate No: GB16647
cid:image004.jpg at 01CA48E6.60E6D920
Certificate No: GB16646
Please carefully consider the environment before you print this email.
Company Registered in England & Wales. Registration No. 5815068
Registered Address: 10A Portland Place, 2-22 Mottram Road, Stalybridge, SK15
3AD, UK.
Privilege and Confidentiality Notice:
This email and any attachments to it are intended only for the party to whom
they are addressed. They may contain privileged and/or confidential
information. If you have received this transmission in error, please notify
the sender immediately and delete any digital copies and destroy any paper
copies. Thank you.
From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Crockett, Jim
Sent: 14 January 2010 17:50
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] Infiltration baseline for modeling
Hi all,
If I'm using Ashrae 90.1 2004, where building leakage hasn't been defined
yet, what should a 'baseline' level of infiltration be? Any thoughts /
experience with this?
Jim Crockett, P.E.
Senior Project Engineer
Energy & Carbon Management
Nexant, Inc.
4021 S. 700 E., Suite 250
Salt Lake City, Utah 84107
(801) 639-5603 - phone
(801) 266-4786 - fax
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100114/be3e1b84/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 3660 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100114/be3e1b84/attachment-0008.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 3268 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100114/be3e1b84/attachment-0009.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 3204 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100114/be3e1b84/attachment-0010.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 3183 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100114/be3e1b84/attachment-0011.jpeg>
More information about the Bldg-sim
mailing list