[Bldg-sim] ASHRAE question

[Rob Hudson]

I was asked what influences an engineers decision over design conditions,
and after looking for some textural support in the books, i could not find
anything to give guidance over when to use 0.4/1/2 or 99/99.6 % design
conditions.  Does anyone know if this text exists in the ASHRAE books and if
so which chapter?  I also looked into ASHRAE 90.1, but that only addresses
efficiencies of equipment and not the design conditions/capacity
calculations.

Thanks in advance,

-- 
Rob Hudson
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100622/34679da5/attachment.htm>