[Bldg-sim] slab-on-grade assembly U-factor

Jorge Torres-Coto jorge at mbo1.com
Wed Jun 30 08:05:11 PDT 2010


Usually floors (raised, between floors, etc.) go by U factor, slab-on-grade
go by F factor

 

Jorge E. Torres Coto   

4830 Viewridge Ave.

San Diego, CA 92123

p              858.751.0933

f              858.751.0937

c              858.688.6088



  _____  

From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Vinay
Devanathan
Sent: Tuesday, June 29, 2010 5:36 PM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] slab-on-grade assembly U-factor

 

Hello All,

I would like to know how to input the assembly U-factor for a slab-on-grade
floor. I see that the Appendix G provides F-factor for the same. I came
across a lot of posts in forums about converting or using the F-factor in
place of U-factor.
But, would like to know what is right way to go about it.

Any help would be greatly appreciated.

Thank you.



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100630/329a2393/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 14532 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100630/329a2393/attachment-0002.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1226 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100630/329a2393/attachment-0002.jpeg>


More information about the Bldg-sim mailing list