[Bldg-sim] Appendix G Chiller

[Snarski, Marty]

Hello, All.

 

After perusing Appendix G and the LEED book, I've been unable to find
the answer to this one:

 

If I've got a project that's using a Air-cooled Chiller, what baseline
chiller do I use?  Appendix G says to use 2 equally sized Screw
Chillers.  But, it doesn't say if these have to be air-cooled or water
cooled.  I'd imagine there's quite a benefit to compare with a water
cooled, when you take into account the cooling tower, etc.

 

Any ideas if this is alright?

 

 

Martin Snarski   LEED(r) AP 
Mechanical Engineer 



 



NOTICE:
This e-mail transmission is intended only for the use of the individual or entity named above and may contain information that is confidential, privileged, and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any review, disclosure, copying, distribution, or other use of any of the information contained in this transmission is strictly prohibited. If you have received this transmission in error, please immediately notify the sender by e-mail at the above address and delete it from your computer system; you should not copy the message or disclose its contents to anyone. The content of the message and or attachments may not reflect the view and opinions of the originating company or any party it is representing.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100527/64200b84/attachment.htm>