[Bldg-sim] Recover eQuest file?

[Craig Simmons]

I should add that the INP associated with the "Baseline Building" was wiped
out as well or I would not have needed to use one of the INPs for the
parametric runs.

 

From: Carol Gardner [mailto:cmg750 at gmail.com] 
Sent: Sunday, May 16, 2010 12:01 PM
To: bfountain at greensim.com
Cc: Craig Simmons; bldg-sim at lists.onebuilding.org
Subject: Re: [Bldg-sim] Recover eQuest file?

 

Thanks, Brian. Please let us know if this works for you, Craig. If it
doesn't I would take a look at the .pd2 file. That is maybe where something
went wrong.
Regards,
Carol

On Sun, May 16, 2010 at 6:22 AM, B. Fountain <bfountain at greensim.com> wrote:

I would suggest trying the following:

- start with a new, blank project file.  To do this, start a new project,
select a wizard (either SD or DD) then hit the red "x" instead of finish.
That should put you in the detailed interface with a blank project.

- now simply "file import" one of the .inp files.

You will lose all the info in the .pd2 which is the original wizard data,
the CAD file link and the weather file setting (so you will need to
reselect the weather file).  However, all of your detailed interface data
should be there.

Your parametric run data is in a .prd text file so once your new file is
saved, you may be able to copy & rename the .prd to the new "project file
anme".prd and recover your parametric run info as well.

This has saved me quite a few times.

Good luck.

Brian


> Due to an error in a parametric run eQuest wiped out everything but the
> Building Shell components in the BDL file of a model I am working on.
> Because I have been doing so many parametric runs I have tons of INP files
> that have everything in them. I have similar back-ups that I could use but
> unfortunately none from today, meaning I'd need to redo quite a bit.
>
>
>
> Is there any way to create a BDL from an INP?
>
>
>
> The information seems like it's there, just not in the right format.
> Primarily the BDL has specific references to curves that the INP does not
> have, but all the curves in this model are defaults.
>
>
>
> Any help is appreciated.
>
>
>
> Thanks.
>
>
>
> Craig
>

> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>


_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG




-- 
Carol Gardner PE

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100516/78c97105/attachment-0002.htm>