[Bldg-sim] Modeling different Energy Recovery Scenarios
Adam Niederloh
AdamN at TWGI.com
Wed Nov 17 10:32:08 PST 2010
All,
I am curious to know what programs/methodologies people have used to
effectively model the following types of energy recovery systems:
1.) Dual Wheel Heat Recovery with a Cooling Coil between the wheels.
This system is similar to the SEMCO Pinnacle system. As the outdoor air
travels through the air handler it passes first through a total energy
wheel, then through a cooling coil and then through a passive
dehumidification wheel. The exhaust air, as it leaves the building,
travels through the passive dehumidification wheel and then the total
energy wheel.
2.) Twice through Heat Recovery with a Cooling Coil in between the
first and second pass. This system is similar to a DesertAire system.
The outside air passes through the heat recovery device, through a
cooling coil, and then through the other side of the same heat recovery
device thus pre-cooling the outdoor air and reheating the supply air.
Please see the attached PDF for very simple schematic sketches of each
option.
Thanks,
Adam
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20101117/ba631ced/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: EnergyRecoveryVariationSchematics.pdf
Type: application/octet-stream
Size: 444580 bytes
Desc: EnergyRecoveryVariationSchematics.pdf
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20101117/ba631ced/attachment-0002.obj>
More information about the Bldg-sim
mailing list