[Bldg-sim] BUILDING ENERGY MODELING WORKSHOP

[David Eldridge]

Just to clarify, the course could be useful in your preparations for the
BEMP exam, and will focus on useful procedures and techniques for energy
modeling for varying project scope.



The course would also be very useful for those practitioners that haven’t
met all of the prerequisites to sit for the BEMP exam, but want to expand
their skill set.



David

*
*



David S. Eldridge, Jr., P.E., LEED AP BD+C, BEMP, HBDP

*Grumman/Butkus Associates*

*
*



*From:* bldg-sim-bounces at lists.onebuilding.org [mailto:
bldg-sim-bounces at lists.onebuilding.org] *On Behalf Of *Carol Gardner
*Sent:* Friday, October 15, 2010 1:05 PM
*To:* Justin Spencer
*Cc:* ibpsausa at onebuilding.org; bldg-sim at lists.onebuilding.org;
tc47-l at onebuilding.org
*Subject:* Re: [Bldg-sim] BUILDING ENERGY MODELING WORKSHOP



Hi Justin,

I have not taken this workshop but intend to. It is for the BEMP
certification test sponsored by ASHRAE.

Carol

On Fri, Oct 15, 2010 at 11:00 AM, Justin Spencer <jspencer17 at gmail.com>
wrote:

Do you have a detailed syllabus and an intended audience that you can
share? Will this be specific to any particular simulation tools, or focused
on generic best practices?



Can anybody chime in on their experience with the workshop?

On Fri, Oct 15, 2010 at 11:11 AM, Michael Wetter <mwetter at lbl.gov> wrote:

 2nd Announcement: IBPSA-USA in conjunction with the Rocky Mountain
Institute and with support from ASHRAE present:

*BUILDING ENERGY MODELING WORKSHOP* (HVAC AND THERMAL EMPHASIS)

*November 1, DENVER, CO*:
  The Xcel Building
  1800 Larimer Street
  Denver, CO  80202
  Registration: http://www.denverbuildingenergymodeling.eventbrite.com
  Presenters: Ellen Franconi, Kendra Tupper and Aleka Pappas.

*November 12, ARLINGTON, TX*:
  E. H. Herefored University Center
  University of Texas, Arlington
  300 W. First Street
  Arlington, TX  76019
  Registration: http://arlingtonbuildingenergymodeling.eventbrite.com
  Presenters: Gail Hampsmire and Erik Kolderup.

Go to www.ibpsa.us for content and further information.

Cost: $485 for non-students and $395 for students.

A first sold-out workshop was well-received at SimBuild, August, 2010, in
New York.

Thank you,

Michael Wetter
President IBPSA-USA
MWetter at lbl.gov

_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG



_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG




-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20101015/40fd3bb7/attachment-0002.htm>