[Bldg-sim] Building zones
John Aulbach
jra_sac at yahoo.com
Tue Jul 12 12:19:16 PDT 2011
Genai:
I don't do much LEED. But don't you set up the model in the way it is actually zoned? A single zoom would not have two thermostts.
From: Evgenia Gorbachinsky <gorbachinsky at gmail.com>
To: bldg-sim at lists.onebuilding.org
Sent: Tuesday, July 12, 2011 10:57 AM
Subject: [Bldg-sim] Building zones
Dear all,
I often do loads, and I have not had this question before. Now I have a debate with my co-worker.
The LEED and ASHRAE 90.1 say that every solar exposure has to have a separate control zone. I agree. But ...
I usually model a room with different exposures as one zone if it is different from other rooms or attach this room to a zone with the exposure that has more influence ( if room has South and West walls, I attach to a zone with similar usage rooms with south exposure). And my co-worker says that LEED asks to submit a plan with properly modeled zones which have to have their own control.
The question is
Do I have to assume 2 zones for a room with 2 different exposures or I still can model as one zone with one control.
Thank you,
--
With best wishes,
Genia Gorbachinsky
_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send a blank message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20110712/0f788e00/attachment-0002.htm>
More information about the Bldg-sim
mailing list