[Bldg-sim] Multi-Family Lighting Assumptions

[Arpan Bakshi]

Question on defining lighting power densities in multi-family residential.
Folks who do a lot of multi-family, let me know if this sounds correct on
the LEED side of assumptions.


   1. All common areas 0.7 W/SF in baseline
   2. All living units lighting is process loads, same in both cases
   3. No decorative fixture allowances

-- 


Arpan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20110609/3d839301/attachment.htm>