[Bldg-sim] Trace 700 & Help with EQuest

[Andrew Craig]

Kirk---

 

Although I've never done it, you can export from Trace to gbXML which
could then be imported into eQUEST via Autodesk Green Building Studio.
Might be more work in clean up though then just creating the eQUEST
model from scratch.  There are good tutorials available for eQUEST via
http://www.doe2.com

 

Regards,

 

Andrew Craig PE, LEED AP
Project Mechanical Engineer

INTERFACE ENGINEERING
708 SW Third Avenue, Suite 400, Portland, OR 97204
email andrewc at interfaceeng.com <mailto:andrewc at interfaceeng.com> 
direct 503.382.2696

www.interfaceeng.com <http://www.interfaceeng.com/> 

10      Net-Zero / Living Buildings in Design (and growing...)
80      LEED Certified Projects
200+  LEED Registered Projects



 

From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Kirk Stache
Sent: Friday, September 09, 2011 6:21 AM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] Trace 700 & Help with EQuest

 

I am an experienced Trace 700 user. I was recently presented with a
request to create an EQuest project from an existing Trace 700 file. 

 

I have never used EQuest before. Does anyone know an easy way to take
the information from the Trace file and import it into an EQuest file?
If not, is anyone aware of free EQuest training?

 

Thanks,

Kirk

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20110912/6a1f2bfd/attachment-0001.htm>