[Bldg-sim] Reporting of space wetbulb temperature

[Robby Oylear]

In my experience, no.  I've used the entering mixed air humidity ratio to
calculate entering wet bulb temperature, which is not an easy solution.

Robby Oylear, PE, LEED AP

*Mechanical Engineer*

*Senior Energy Analyst*

* *

*D* 206-788-4571

*www.rushingco.com* <http://www.rushingco.com/>

On Tue, Jul 17, 2012 at 3:38 PM, Andrew Sheaffer
<asheaffer at environcorp.com>wrote:

>  Is there an easy way to get equest to report out wet-bulb temperature
> for a conditioned space?  ****
>
> ** **
>
> Thanks in advance.****
>
> ** **
>
> Andrew****
>
> ** **
>
> <http://www.environcorp.com/>****
>
> *Andrew Sheaffer, PE, CEM** | *Manager, Carbon and Energy****
>
> ENVIRON International Corporation****
>
> 333 W. Wacker | Suite 2700 | Chicago, IL 60618
> T: +1 312 288 3897 | F: +1 312 288 3801 | M: +1 312 731 7096****
>
> asheaffer at environcorp.com****
>
> ** **
>
> ------------------------------
> This message contains information that may be confidential, privileged or
> otherwise protected by law from disclosure. It is intended for the
> exclusive use of the Addressee(s). Unless you are the addressee or
> authorized agent of the addressee, you may not review, copy, distribute or
> disclose to anyone the message or any information contained within. If you
> have received this message in error, please contact the sender by
> electronic reply to email at environcorp.com and immediately delete all
> copies of the message.
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20120717/e8068437/attachment-0002.htm>