[Bldg-sim] Appendex G LPD

javed iqbal javedvit at gmail.com
Mon Jun 25 10:37:43 PDT 2012


Kris,

There was a detail discussion on the same issue few weeks before on eQuest
forum. you can check the archives by following key word:
"Building area method ASHRAE 90.1"
Hope you will get all your doubts clear there!

Thanks!


On Mon, Jun 25, 2012 at 10:41 PM, Kris Raj <kris_raj at rocketmail.com> wrote:

> Robby, Thanks for your response. I did see that section. It just gets
> confusing because the same section seems to indicate that the baseline
> lighting power density can be based on whole building method. Also the LEED
> EAp2 1.4 template excel spreadsheet has entries to indicate weather the
> lighting is based on space-by-space or building area method.
> thanks
> raj
>
>   ------------------------------
> *From:* Robby Oylear <robbyoylear at gmail.com>
> *To:* Kris Raj <kris_raj at rocketmail.com>
> *Cc:* Bldg-sim <bldg-sim at lists.onebuilding.org>
> *Sent:* Monday, June 25, 2012 12:08 PM
> *Subject:* Re: [Bldg-sim] Appendex G LPD
>
> Kris,
>
> Refer ASHRAE 90.1-2007 Appendix G Table G3.1 item 6 for the Proposed
> Building Performance.
>
> Yes, you have to go through the lighting layout and calculate the power
> for each zone.
>
> Robby Oylear, P.E., LEED AP
> *Mechanical Engineer*
> *Senior Energy Analyst*
> * *
> *D* 206-788-4571
> *www.rushingco.com* <http://www.rushingco.com/>
>
> On Mon, Jun 25, 2012 at 6:24 AM, Kris Raj <kris_raj at rocketmail.com> wrote:
>
> hello,
>          Does anyone know if we can use building area method for lighting
> in the proposed case for a LEED App G simulation. We were just given the
> total wattage of the building from the lighting designer. Or would we have
> to go through the lighting layout and calculate the power for each zone.
>
> thanks
> raj
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
>
>
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
*

Javed Iqbal, LEED AP, CEA
Energy Analyst
M:+919891020464*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20120625/69c3c500/attachment-0002.htm>


More information about the Bldg-sim mailing list