[Bldg-sim] RES: EnergyPlus IDFs, gbXML and Bentley/Autodesk

[Dru Crawley]

>From the gbXML LinkedIn Group, posted by Stephen Roth:

'Recording of Autodesk Vasari/Bentley AECOsim Webinar - May 23, 2012

Here's a link to the recording of the Autodesk Vasari/Bentley AECOsim
webinar that I hosted.  https://vimeo.com/42737981'

On Fri, May 25, 2012 at 2:40 AM, CleanTech Analytics <
jeremiah at cleantechanalytics.com> wrote:

>
>    - I was sigend up for the webnar, but unfortunately missed the
>    webnaiar due to my attendance of the design builder training I was at at
>    the time. still very interested in future versions of micro
>    station/E+(ACOSIM) Tho,, Once the latest v7.1  iteration ACEOSIM is
>    released I am very excited indeed, but have to say the design builder
>    training and software are excellent and is the most advanced energy plus
>    interface currently available! --  http://www.designbuilderusa.com/
>
>
> *Jeremiah D. Crossett*
> *CleanTech Analytics*
> *503-688-8951*
>  *www.cleantechanalytics.com* <http://www.cleantechanalytics.com>
>
>
> *
>
> This document may contain valuable information proprietary to CleanTech
> Analytics which is private and confidential. It may not be shared, copied,
> stored or transmitted in any form without the prior written consent of
> CleanTech Analytics
> *
>
>
>
> On Thu, May 24, 2012 at 10:48 PM, kanagaraj ganesan <
> gkanagaraj83 at gmail.com> wrote:
>
>> Dear All,
>> I registered for the webinar on " How gbXML Works with New Energy
>> Performance Software from Autodesk and Bentley " but unfortunately
>> missed it due to its off timing in India. Would it be possible to view the
>> recording of this webinar?
>>
>> If available, also direct me to similar recorded webinars.
>>
>> Many thanks,
>>
>> With Regards,
>> Kanagaraj
>>
>> On Fri, May 25, 2012 at 2:21 AM, <Dru.Crawley at bentley.com> wrote:
>>
>>>  A 30-day free trial is available for AES – go to the web site for more
>>> information:
>>> http://www.bentley.com/en-US/Products/AECOsim+Energy+Simulator/****
>>>
>>> ** **
>>>
>>> ** **
>>>
>>> ** **
>>>
>>> *From:* Arpan Bakshi [mailto:arpanbakshi at gmail.com]
>>> *Sent:* Thursday, May 24, 2012 4:43 PM
>>> *To:* Dru Crawley
>>> *Cc:* bldg-sim at lists.onebuilding.org
>>> *Subject:* Re: [Bldg-sim] RES: EnergyPlus IDFs, gbXML and
>>> Bentley/Autodesk****
>>>
>>> ** **
>>>
>>> Bentley does not provide a 30-day trial for AECOsim Energy Simulator?***
>>> *
>>>
>>>
>>> ****
>>>
>>>  ****
>>>
>>> Arpan Bakshi, LEED AP BD+C****
>>>
>>>
>>>
>>> ****
>>>
>>> On Thu, May 24, 2012 at 4:40 PM, <Dru.Crawley at bentley.com> wrote:****
>>>
>>> AECOsim Energy Simulator currently allows user to import HVAC systems
>>> from IDFs to start building their HVAC models. We will be implementing more
>>> importing capabilities over the next months.  Users have the option of
>>> starting with one of the 28 preconfigured HVAC systems in AES and modifying
>>> those to match their system configuration.  These preconfigured HVAC
>>> systems give users access to all the EnergyPlus inputs required for each
>>> system.  Users can also create their own systems and save them for future
>>> use.****
>>>
>>>  ****
>>>
>>> AES offers three means of creating geometry – Conceptual model (select
>>> building and space types, set overall building height, weather location, %
>>> glazing, number of stories, draw the outline, select zoning, and HVAC
>>> system); 2-D (import floor plans – DGN, DWG, DXF, define rooms); and gbXML
>>> (import 3-D model, attribute spaces).****
>>>
>>>  ****
>>>
>>> When Energy Simulator starts a simulation, it automatically creates a
>>> user-readable IDF in the project directory.****
>>>
>>>  ****
>>>
>>>  ****
>>>
>>>  ****
>>>
>>> *From:* bldg-sim-bounces at lists.onebuilding.org [mailto:
>>> bldg-sim-bounces at lists.onebuilding.org] *On Behalf Of *Leandro
>>> Meneguelli Biondo
>>> *Sent:* Thursday, May 24, 2012 4:27 PM
>>> *To:* Lopez, Phylroy; bldg-sim at lists.onebuilding.org
>>> *Subject:* [Bldg-sim] RES: EnergyPlus IDFs, gbXML and Bentley/Autodesk**
>>> **
>>>
>>>  ****
>>>
>>> Ok, but it would make more sense if this capability was buit in on both
>>> softwares… specially on AECOsim that uses the EP engine… I surely would
>>> like to have all the energyplus power for “freedom” on object settings
>>> (specially HVAC and green energy) working in parallel to the better
>>> interface and automation offered by the simulation suites. Would that be
>>> fair?****
>>>
>>>  ****
>>>
>>> *Leandro M Biondo*
>>> Consultor de Eficiência Energética****
>>>
>>> Meteorologista
>>> Rua Álvaro Rodrigues, 182 - Cj. 153
>>> Brooklin - São Paulo - CEP 04582-000
>>> tel: (11) 2149 0300 Ram.352/cel: (11) 6436 3510
>>> *http://www.cte.com.br* ****
>>>
>>>  ****
>>>
>>>  ****
>>>
>>>  ****
>>>
>>> *Aviso Legal*****
>>>
>>> Esta mensagem pode conter informações confidenciais e/ou privilegiadas.
>>> Se você não****
>>>
>>> for o destinatário ou a pessoa autorizada a receber esta mensagem, não
>>> deve usar, copiar****
>>>
>>> ou divulgar as informações nela contida ou tomar qualquer ação baseada
>>> nessas****
>>>
>>> informações. Este ambiente está sujeito a monitoramento.****
>>>
>>>  ****
>>>
>>> *De:* Lopez, Phylroy [mailto:Phylroy.Lopez at NRCan-RNCan.gc.ca<Phylroy.Lopez at NRCan-RNCan.gc.ca>]
>>>
>>> *Enviada em:* Thursday, May 24, 2012 15:26
>>> *Para:* Leandro Meneguelli Biondo; bldg-sim at lists.onebuilding.org
>>> *Assunto:* RE: [Bldg-sim] EnergyPlus IDFs, gbXML and Bentley/Autodesk***
>>> *
>>>
>>>  ****
>>>
>>>  ****
>>>
>>> Openstudio I think has that capability. If not it is in the works. ****
>>>
>>>  ****
>>>  ------------------------------
>>>
>>> *From:* bldg-sim-bounces at lists.onebuilding.org
>>> [mailto:bldg-sim-bounces at lists.onebuilding.org] *On Behalf Of *Leandro
>>> Meneguelli Biondo
>>> *Sent:* May 24, 2012 14:22
>>> *To:* bldg-sim at lists.onebuilding.org
>>> *Subject:* [Bldg-sim] EnergyPlus IDFs, gbXML and Bentley/Autodesk****
>>>
>>> This is a simple question that I tought of on the gbXML webinar thinking
>>> it would be a basic routine on both Bentley´s AECOsim and Autodesk´s Vasari
>>> systems, but haven´s found an answer so far. That is:****
>>>
>>>  ****
>>>
>>> How can I import EnergyPlus (5, 6 and 7) idf files with all my current
>>> modeling information to the environments? From what I have seen there
>>> always is a way to start from a gbXML, but how do I go from a “idf” file to
>>> a gbXML or straight to AECO or Vasari?****
>>>
>>>  ****
>>>
>>> Also, how do I keep compatibility between my AECO / Vasari simulations
>>> and a EnergyPlus model?****
>>>
>>>  ****
>>>
>>>  ****
>>>
>>>  ****
>>>
>>> [image: Descrição: Descrição: Descrição: Descrição:
>>> cid:image001.png at 01CC81F3.24A80950]****
>>>
>>> *Leandro M Biondo*
>>> Energy Efficiency Consultant****
>>>
>>> Meteorologist
>>> Rua Álvaro Rodrigues, 182 - Cj. 153
>>> Brooklin - São Paulo - Brasil
>>> tel: (11) 2149 0300 cel: (11) 6436 3510
>>> *http://www.cte.com.br* ****
>>>
>>>  ****
>>>
>>>  ****
>>>
>>>
>>> _______________________________________________
>>> Bldg-sim mailing list
>>> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
>>> To unsubscribe from this mailing list send  a blank message to
>>> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG****
>>>
>>> ** **
>>>
>>> _______________________________________________
>>> Bldg-sim mailing list
>>> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
>>> To unsubscribe from this mailing list send  a blank message to
>>> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>>>
>>>
>>
>>
>> --
>> G.KANAGARAJ
>> 2-F, C.P.W.D. Colony,
>> Vasant Vihar,
>> New Delhi-57
>> Mob. No. - +91 9971841354
>> Alternate e-mail - g_kanagaraj83 at rediffmail.com
>>
>>
>> _______________________________________________
>> Bldg-sim mailing list
>> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>>
>>
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20120525/b3aea3a2/attachment-0002.htm>