[Bldg-sim] How to know how much cold is produced in eQuest?

[Joe Huang]

According to the DOE-2.1E manual, page C.131, the TOTAL COOLING LOAD in the PS-A report is 
"the total of the values shown in the SS-D report plus tank and circulation loop losses; 
it represents the cooling energy needed each month".

Joe

Joe Huang
White Box Technologies, Inc.
346 Rheem Blvd., Suite 108D
Moraga CA 94556
yjhuang at whiteboxtechnologies.com
www.whiteboxtechnologies.com
(o) (925)388-0265
(c) (510)928-2683
"building energy simulations at your fingertips"


On 4/16/2013 4:43 PM, Esmireta wrote:
> Dear all,
> In the eQuest output file, can we know the produced cold or heat?
> I would like to calculate the comprehensive efficency of the cooling system. The power 
> consumption of the cooling system, including chiller, pumps etc., is easy to get. But 
> the generated cold of the cooling system cannot be found.
> I tried to use the total cooling energy in ¡°PS-A Plant energy utilization¡±, or cooling 
> energy sum in "SS-D Building HVAC load summary", but the they are not equal to each other.
> Can anybody give some light on it?
> Thanks!
> Esmi
>
>
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20130416/f0cf5132/attachment-0002.htm>