[Bldg-sim] benchmark for printing facility
Peter Simmonds
psimmonds11 at gmail.com
Tue Dec 17 10:54:30 PST 2013
Ery, try this?
Thermal storage incorporated in the mechanical system for printing works to
offset peak loads
The electrical consumption of a printing works can be reduced by utilising
thermal storage loads. In order to achieve a balance between 100% outdoor
air and conditioned air, different ventilation schemes were compared. The
subsequent cooling load derived from the comparison was further evaluated to
see if a chiller plant together with a thermal storage system would reduce
energy costs.
AUTHOR: Simmonds P., Braam T.
CITATION: ASHRAE Trans., 1997, Vol.103, Part 2, Paper number BN-97-10-3,
734-744, 4 tabs., refs
KEYWORDS: Energy storage, printing works, peak load, electricity
consumption, energy conservation, comparing, cooling load, chillers, payback
period, calculating, performance,
YEAR: 1997
-----Original Message-----
From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Ery Djunaedy
Sent: Monday, December 16, 2013 3:25 PM
To: bldg-sim at onebuilding.org
Subject: [Bldg-sim] benchmark for printing facility
All,
I am looking for a benchmark for printing facility. If not a set of data, a
single data point would also be welcome.
Thanks,
Ery
_______________________________________________
Bldg-sim mailing list
<http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org>
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send a blank message to
<mailto:BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG>
BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20131217/79401698/attachment-0002.htm>
More information about the Bldg-sim
mailing list