[Bldg-sim] IBPSA NY Event
Hayes Zirnhelt
hzirnhelt at hotmail.com
Wed Feb 27 13:13:36 PST 2013
That sounds like a great event. Will there be a web casting or webinar option?
Thanks,Hayes
From: bldg-sim-request at lists.onebuilding.org
Subject: Bldg-sim Digest, Vol 63, Issue 20
To: bldg-sim at lists.onebuilding.org
Date: Tue, 26 Feb 2013 13:00:46 -0800
Send Bldg-sim mailing list submissions to
bldg-sim at lists.onebuilding.org
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
or, via email, send a message with subject or body 'help' to
bldg-sim-request at lists.onebuilding.org
You can reach the person managing the list at
bldg-sim-owner at lists.onebuilding.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Bldg-sim digest..."
--Forwarded Message Attachment--
From: abakshi at yrgxyz.com
To: ibpsausa at lists.onebuilding.org; bldg-sim at lists.onebuilding.org
Date: Tue, 26 Feb 2013 15:02:54 -0500
Subject: [Bldg-sim] March 14 IBPSA event at Syska Hennessy
IBPSA-USA NEW YORK REGIONAL CHAPTER presents
EnergyPlus GUI I
COMFEN and N++
Location: Syska Hennessy, 1515 Broadway, New York, NY 10036. Tel. 646.276.4494
Date & Time: Thursday, March 14, 2013 - 6:00-8:00 PM.
6:00-6:30 PM Networking
6:30-7:00 PM EnergyPlus for Early Design and Single Zone Studies
David Fannon AIA – Senior Associate, Senior High Performance Specialist, Syska Hennessy Group, Inc.
7:00-7:15
PM Q & A
7:15-7:45 PM A demonstration of the latest GUI for EnergyPlus
Vladimir Bajic – Senior Energy Engineer and Software Developer, Viridian and ExpertApp
7:45-8:00 PM Q & A
PLEASE RSVP (abakshi at yrgxyz.com) IF YOU ARE PLANNING TO ATTEND.
Descriptions
Presentation 1
Title: EnergyPlus for Early Design and Single Zone Studies; David Fannon AIA, Senior Associate, Senior High Performance Specialist, Syska Hennessy Group, Inc.
Description: This talk focuses on using COMFEN to run simplified EnergyPlus models which inform early design-decisions and perform simple single-zone studies quickly and relatively inexpensively. Using examples from recent projects, we will discuss ways to use COMFEN both an interface for rapid simulation and as a ready-made database that can be manipulated outside the GUI for comparative studies. The presentation concludes with some notes on analyzing the results, the limitations of the tool and Quality Assurance processes.
About the Speaker: David is a New York- based member of Syska Hennessy's High Performance Solutions team, with broad perspective and experience as a designer, building science researcher and teacher. His expertise lies in integrating research, analysis, and design to provide luminous, thermal and acoustic comfort while reducing resource consumption in buildings. In the summer of 2011 David traveled to Japan as part of the Architecture.Energy.2011 workshop to assist architects rebuilding after the natural and nuclear disasters. He spent two years as a student and researcher in the Center for the Built Environment at the University of California Berkeley, and is currently completing his degree. David holds a Bachelor of Architecture degree from Rensselaer Polytechnic Institute and is a registered architect in the State of New York.
Presentation 2 Title: N++: A demonstration of the latest GUI for EnergyPlus; Vladimir Bajic – Senior Energy Engineer and Software Developer
Description: N++ is a building energy modeling software created to emulate the architectural and engineering design process. As a front interface for the highly capable EnergyPlus simulation engine, N++ allows the user to input project information into the energy simulation in an intuitive, highly visible fashion that simplifies the energy modeling process for designers who are new to energy analysis. During the presentation Mr. Bajic will demonstrate the construction of an energy model in N++, exemplifying the innovative features that simplify the construction of complex building geometries, lighting designs and mechanical systems. The presentation will also demonstrate the flexible capability of N++ to build multiple parametric runs and produce an energy code baseline quickly and easily.
About the Speaker: Mr. Bajic is a mechanical engineer with over 16 years of experience in the HVAC industry as a designer, energy modeler and software developer. His experience is both international and domestic. Mr.Bajic’s main focus is building software applications that will help architects and engineers design more efficient buildings as part of an integrated design process. Mr. Bajic is currently a senior energy engineer at Viridian Energy & Environmental (a Vidaris company). He is also the founder of the ExpertApp (www.expertapp.com), a software company that is specialized in creating engineering and architectural cad-based applications focused on integrated sustainable design.
_________________________________________
Arpan Bakshi Sustainability Manager
LEED AP BD+C, ESTIDAMA PQP
YR&G
sustainability consulting, education and analysis
161 Bowery - 4th Floor - NY NY 10002
D 646.704.2880
yrgxyz.com | facebook | twitter
--Forwarded Message Attachment--
From: abakshi at yrgxyz.com
To: bldg-sim at lists.onebuilding.org; ibpsausa at lists.onebuilding.org
Date: Tue, 26 Feb 2013 20:08:48 +0000
Subject: [Bldg-sim] Invitation: EnergyPlus GUI presentations @ Thu Mar 14, 2013 6pm - 8pm (bldg-sim at lists.onebuilding.org)
more details »
EnergyPlus GUI presentationsIBPSA-USA NEW YORK REGIONAL CHAPTER presentsEnergyPlus GUI I
COMFEN and N++
Location: Syska Hennessy, 1515 Broadway, New York, NY 10036. Tel. 646.276.4494 Date & Time: Thursday, March 14, 2013 - 6:00-8:00 PM.6:00-6:30 PM Networking6:30-7:00 PM EnergyPlus for Early Design and Single Zone Studies
David Fannon AIA – Senior Associate, Senior High Performance Specialist, Syska Hennessy Group, Inc.7:00-7:15 PM Q & A7:15-7:45 PM A demonstration of the latest GUI for EnergyPlus
Vladimir Bajic – Senior Energy Engineer and Software Developer, Viridian and ExpertApp 7:45-8:00 PM Q & A
PLEASE RSVP (abakshi at yrgxyz.com) IF YOU ARE PLANNING TO ATTEND.
Descriptions
Presentation 1Title: EnergyPlus for Early Design and Single Zone Studies; David Fannon AIA, Senior Associate, Senior High Performance Specialist, Syska Hennessy Group, Inc.
Description: This talk focuses on using COMFEN to run simplified EnergyPlus models which inform early design-decisions and perform simple single-zone studies quickly and relatively inexpensively. Using examples from recent projects, we will discuss ways to use COMFEN both an interface for rapid simulation and as a ready-made database that can be manipulated outside the GUI for comparative studies. The presentation concludes with some notes on analyzing the results, the limitations of the tool and Quality Assurance processes.
About the Speaker: David is a New York- based member of Syska Hennessy's High Performance Solutions team, with broad perspective and experience as a designer, building science researcher and teacher. His expertise lies in integrating research, analysis, and design to provide luminous, thermal and acoustic comfort while reducing resource consumption in buildings. In the summer of 2011 David traveled to Japan as part of the Architecture.Energy.2011 workshop to assist architects rebuilding after the natural and nuclear disasters. He spent two years as a student and researcher in the Center for the Built Environment at the University of California Berkeley, and is currently completing his degree. David holds a Bachelor of Architecture degree from Rensselaer Polytechnic Institute and is a registered architect in the State of New York.
Presentation 2
Title: N++: A demonstration of the latest GUI for EnergyPlus; Vladimir Bajic – Senior Energy Engineer and Software Developer Description: N++ is a building energy modeling software created to emulate the architectural and engineering design process. As a front interface for the highly capable EnergyPlus simulation engine, N++ allows the user to input project information into the energy simulation in an intuitive, highly visible fashion that simplifies the energy modeling process for designers who are new to energy analysis. During the presentation Mr. Bajic will demonstrate the construction of an energy model in N++, exemplifying the innovative features that simplify the construction of complex building geometries, lighting designs and mechanical systems. The presentation will also demonstrate the flexible capability of N++ to build multiple parametric runs and produce an energy code baseline quickly and easily.About the Speaker: Mr. Bajic is a mechanical engineer with over 16 years of experience in the HVAC industry as a designer, energy modeler and software developer. His experience is both international and domestic. Mr.Bajic’s main focus is building software applications that will help architects and engineers design more efficient buildings as part of an integrated design process. Mr. Bajic is currently a senior energy engineer at Viridian Energy & Environmental (a Vidaris company). He is also the founder of the ExpertApp (www.expertapp.com), a software company that is specialized in creating engineering and architectural cad-based applications focused on integrated sustainable design.
WhenThu Mar 14, 2013 6pm – 8pm Eastern TimeWhereSyska Hennessy, 1515 Broadway, New York, NY 10036 (map)Calendarbldg-sim at lists.onebuilding.orgWho•abakshi at yrgxyz.com - organizer•ibpsausa at lists.onebuilding.org•bldg-sim at lists.onebuilding.orgGoing? Yes - Maybe - No more options »Invitation from Google CalendarYou are receiving this courtesy email at the account bldg-sim at lists.onebuilding.org because you are an attendee of this event.To stop receiving future notifications for this event, decline this event. Alternatively you can sign up for a Google account at https://www.google.com/calendar/ and control your notification settings for your entire calendar.
--Forwarded Message Attachment--
From: abakshi at yrgxyz.com
To: ibpsausa at lists.onebuilding.org; bldg-sim at lists.onebuilding.org
Date: Tue, 26 Feb 2013 15:26:07 -0500
Subject: Re: [Bldg-sim] March 14 IBPSA event at Syska Hennessy
We will be adding GoToMeeting instructions to the calendar invite for attendees outside the Greater New York region soon.
Stay tuned.
_________________________________________
Arpan Bakshi Sustainability Manager
LEED AP BD+C, ESTIDAMA PQP
YR&G
sustainability consulting, education and analysis
161 Bowery - 4th Floor - NY NY 10002
D 646.704.2880
yrgxyz.com | facebook | twitter
On Tue, Feb 26, 2013 at 3:02 PM, Arpan Bakshi <abakshi at yrgxyz.com> wrote:
IBPSA-USA NEW YORK REGIONAL CHAPTER presents
EnergyPlus GUI I
COMFEN and N++
Location: Syska Hennessy, 1515 Broadway, New York, NY 10036. Tel. 646.276.4494
Date & Time: Thursday, March 14, 2013 - 6:00-8:00 PM.
6:00-6:30 PM Networking
6:30-7:00 PM EnergyPlus for Early Design and Single Zone Studies
David Fannon AIA – Senior Associate, Senior High Performance Specialist, Syska Hennessy Group, Inc.
7:00-7:15
PM Q & A
7:15-7:45 PM A demonstration of the latest GUI for EnergyPlus
Vladimir Bajic – Senior Energy Engineer and Software Developer, Viridian and ExpertApp
7:45-8:00 PM Q & A
PLEASE RSVP (abakshi at yrgxyz.com) IF YOU ARE PLANNING TO ATTEND.
Descriptions
Presentation 1
Title: EnergyPlus for Early Design and Single Zone Studies; David Fannon AIA, Senior Associate, Senior High Performance Specialist, Syska Hennessy Group, Inc.
Description: This talk focuses on using COMFEN to run simplified EnergyPlus models which inform early design-decisions and perform simple single-zone studies quickly and relatively inexpensively. Using examples from recent projects, we will discuss ways to use COMFEN both an interface for rapid simulation and as a ready-made database that can be manipulated outside the GUI for comparative studies. The presentation concludes with some notes on analyzing the results, the limitations of the tool and Quality Assurance processes.
About the Speaker: David is a New York- based member of Syska Hennessy's High Performance Solutions team, with broad perspective and experience as a designer, building science researcher and teacher. His expertise lies in integrating research, analysis, and design to provide luminous, thermal and acoustic comfort while reducing resource consumption in buildings. In the summer of 2011 David traveled to Japan as part of the Architecture.Energy.2011 workshop to assist architects rebuilding after the natural and nuclear disasters. He spent two years as a student and researcher in the Center for the Built Environment at the University of California Berkeley, and is currently completing his degree. David holds a Bachelor of Architecture degree from Rensselaer Polytechnic Institute and is a registered architect in the State of New York.
Presentation 2 Title: N++: A demonstration of the latest GUI for EnergyPlus; Vladimir Bajic – Senior Energy Engineer and Software Developer
Description: N++ is a building energy modeling software created to emulate the architectural and engineering design process. As a front interface for the highly capable EnergyPlus simulation engine, N++ allows the user to input project information into the energy simulation in an intuitive, highly visible fashion that simplifies the energy modeling process for designers who are new to energy analysis. During the presentation Mr. Bajic will demonstrate the construction of an energy model in N++, exemplifying the innovative features that simplify the construction of complex building geometries, lighting designs and mechanical systems. The presentation will also demonstrate the flexible capability of N++ to build multiple parametric runs and produce an energy code baseline quickly and easily.
About the Speaker: Mr. Bajic is a mechanical engineer with over 16 years of experience in the HVAC industry as a designer, energy modeler and software developer. His experience is both international and domestic. Mr.Bajic’s main focus is building software applications that will help architects and engineers design more efficient buildings as part of an integrated design process. Mr. Bajic is currently a senior energy engineer at Viridian Energy & Environmental (a Vidaris company). He is also the founder of the ExpertApp (www.expertapp.com), a software company that is specialized in creating engineering and architectural cad-based applications focused on integrated sustainable design.
_________________________________________
Arpan Bakshi Sustainability Manager
LEED AP BD+C, ESTIDAMA PQP
YR&G
sustainability consulting, education and analysis
161 Bowery - 4th Floor - NY NY 10002
D 646.704.2880
yrgxyz.com | facebook | twitter
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20130227/7d0c10fd/attachment.htm>
More information about the Bldg-sim
mailing list