[Bldg-sim] SF discrepancy between Daylighting model and Architecture drawings

[javed iqbal]

Per the attached Advanced Energy Modeling for LEED V2-1, which is available
for free download from LEED On-line, page 30, it states that a 10% variance
for built up areas is allowed.

Hope this helps.


On Wed, Mar 20, 2013 at 11:30 AM, Te Qi <gtqite at gmail.com> wrote:

> Hi all,
>
> I am currently doing daylighting simulation for LEED 2009, but  there
> is always SquareFootage discrepancy of each room between my daylighting
> modeling tool and the Revit model, it just can not be 100% the same with
> the design model. But the leed requrire the SF of each room should be same
> with the architecure drawings and daylighting report? Could anyone help me
> with it, is there any allowance range for the simulation method for LEED
> 2009, which is not mentioned in the reference guide?
>
> Thanks so much,
>
> Te
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
*
*
Javed Iqbal, LEED AP, CEA
Energy Analyst
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20130320/ff8532eb/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Advanced_Energy_Modeling_for_LEED_V2_1c.pdf.pdf
Type: application/pdf
Size: 1736793 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20130320/ff8532eb/attachment-0002.pdf>