[Bldg-sim] Sewer heat recovery

[Sami, Vikram]

We are looking at sewer heat recovery for a large project in the northwest. I have a couple of questions:


1.       Has anyone used this on a project successfully

2.       How do you model it? My initial though is to model it as a lake/well ground loop heat exchanger, but there's probably a good reason not to do it that way.
Thanks in advance

Vikram Sami
Associate Partner



ZGF ARCHITECTS LLP
T 206.521.3509 E vikram.sami at zgf.com
925 Fourth Avenue, Suite 2400
Seattle, WA 98104



________________________________
The contents of this email and any attachments to it contain confidential and/or legally privileged information from Zimmer Gunsul Frasca Architects LLP or its affiliates. If you are not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, be aware that any disclosure, copying, distribution, or use of the information contained herein is strictly prohibited. If you received this transmission in error, please contact the sender and destroy the material in its entirety, whether in electronic or hard copy format.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20130531/18990d6c/attachment.htm>