[Bldg-sim] Training: Discover New Features in OpenStudio v1.3.0

Marek Loder mloder at psdconsulting.com
Tue Apr 8 12:30:59 PDT 2014

Join PSD on May 6th, 2014 from 1:00-2:00pm EDT for a free LIVE demonstration of the most exciting new features in OpenStudio v1.3.0.  As a licensed OpenStudio training and support organization, PSD is offering this webinar to raise awareness of the potential power of OpenStudio. The webinar will be led by PSD’s Vice President of Research and Development, Chris Balbach.  Sign up for the free webinar here: https://www2.gotomeeting.com/register/375878706

Features that will be covered:

Support for modeling refrigeration systems:

OpenStudio 1.3.0 introduces drag, drop and configuration capabilities to model the energy use of common commercial refrigeration systems (e.g. display cases and walk in coolers), including cascading systems. While this is not unique, the ability to integrate the energy impacts of refrigeration systems into a building’s heat balance at an adjustable sub-hourly time step provides tightly coupled feedback for estimating the interactions between energy systems.

Support for modeling VRF HVAC systems

OpenStudio provides drag, drop and configure capabilities for modeling VRF (Variable Flow Refrigerant) HVAC systems and controls of varying complexity. VRF systems can be configured to operate in either a ‘heat pump’ mode, (where the system operates in either heating or cooling mode) or in a heat recovery mode (where indoor units can recover and exchange heat with other indoor units operating in the opposite mode). In addition, the outdoor units can be configured to be air, water or evaporative cooled. User defined performance curves (generated from manufacturers published performance data) can now be used to describe equipment performance.

Support for modeling supply and return plenum configurations

Forced Air HVAC systems commonly use plenums for supplying and/or returning the conditioned air. This release of OpenStudio allows users to define and configure supply and return plenums that serve multiple conditioned zones. Plenums are considered unconditioned thermal zones and are composed of children OpenStudio spaces.  The plenum zones can leverage OpenStudio’s space type definitions for rapid object and property assignments.


Marek Loder
Manager, Strategy and Marketing

[Description: Description: cid:image003.jpg at 01CCFBBB.34717A50]

Tel: 215.381.2929 x306
Cell: 215.435.3323
40 West Evergreen Ave. Suite 110
Philadelphia, PA 19118
IMPORTANT NOTICE: This email message is intended to be received only by persons entitled to receive the confidential information it may contain. Email messages to clients of Performance Systems Development may contain information that is confidential and legally privileged. Please do not read, copy, forward, or store this message unless you are an intended recipient of it. If you have received this message in error, please forward it to the sender and delete it completely from your computer system.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20140408/c9b05762/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 292DD224-386C-4276-9E26-FE2569557029[22].png
Type: image/png
Size: 14840 bytes
Desc: 292DD224-386C-4276-9E26-FE2569557029[22].png
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20140408/c9b05762/attachment.png>

More information about the Bldg-sim mailing list