[Bldg-sim] Chiller COP

[John Aulbach]

COP of chiller is 1/EIR (Energy Input ratio) in eQuest/DOE-2. There is a curve in the program that relates theses parameters.

John R. Aulbach, PE


On Friday, August 22, 2014 3:59 AM, Jim Dirkes <jim at buildingperformanceteam.com> wrote:
 


Sambhav,
EnergyPlus uses several curves to define performance mathematically.  I think that is a common practice for almost all energy modeling software – read up on the use of performance curves!
 
James V Dirkes II, PE, BEMP, LEED AP
www.buildingperformanceteam.com
Energy Analysis, Commissioning & Training Services
1631 Acacia Drive, Grand Rapids, MI 49504USA
616 450 8653
 
From:Bldg-sim [mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Sambhav Tiwari
Sent: Friday, August 22, 2014 6:55 AM
To: bldg-sim
Subject: [Bldg-sim] Chiller COP
 
Hi Friends,
                 Is there any mathematical formula which co relates cop of chiller with chilled water temperature and condenser water entering temperature.
 
 
Warm Regards
Sambhav 
 

_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send  a blank message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20140822/7ecc0942/attachment.htm>