[Bldg-sim] Occupancy patterns/loads for residential buildings

[ldegelman at suddenlink.net]

If you want typical internal gains (though not schedules), check out Table 303.4 (and more for the U.S.) in this RESNET Standard: http://www.resnet.us/standards/RESNET_Mortgage_Industry_National_HERS_Standards.pdf.

Regards,

Larry

\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Larry O. Degelman, PE, FIBPSA, ASHRAE
Professor Emeritus of Architecture
Texas A&M University
//////////////////////////////////////////////////////////////

From: Theofanis Psomas 
Sent: Sunday, August 31, 2014 2:31 AM
To: bldg-sim at onebuilding.org 
Subject: [Bldg-sim] Occupancy patterns/loads for residential buildings

Dear all, 
I am interesting for sources, reports and scientific papers for real/measured occupancy patterns and internal loads for single family buildings for Europe or USA.
thanks in advance


-- 

Theofanis Psomas
Civil Engineer MSc, DIC



--------------------------------------------------------------------------------
_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send  a blank message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20140831/c8072269/attachment.htm>