[Bldg-sim] Mixed fuel baseline for LEED

Duggin, Cory Cory.Duggin at tlc-eng.com
Fri Dec 5 11:20:41 PST 2014


It would be easiest if you used option 2 per the USGBC district energy modeling guidelines.  Then the baseline doesn't change.  I would then choose heating source based on the predominant system, which I would assume is the VRF.

Cory Duggin, EI, LEED AP BD+C
Associate/Energy Engineer
TLC Engineering for Architecture
direct:

615-346-1939



From: Bldg-sim [mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of kbk kbk
Sent: Friday, December 05, 2014 1:10 PM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] Mixed fuel baseline for LEED


We have a building that uses VRF systems for Space cooling/heating. However the Outdoor air is conditioned using Hot/Chilled water from the campus loop. This poses a challenge in selecting the baseline.

If anybody and experienced this situation could you please hint on your approach.
Thanks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20141205/c0a569ef/attachment-0001.htm>


More information about the Bldg-sim mailing list