[Bldg-sim] 90.1-2010 Baseline lighting power allowance calculation

Jones, Christopher cjones at halsall.com
Thu Sep 25 09:51:25 PDT 2014


I am somewhat confused about calculating the baseline lighting power calculation, Space-By-Space method, with respect to lighting controls.

For example, Table G3.1 states "Lighting shall be modeled having the automatic and manual controls in Section 9.4.  For a Conference/Meeting/Multipurpose room the LPD is 1.23 W/ft2.  9.4.1.2.(b) states that a conference room shall have an occupancy sensor.  Does this mean that the LPD is reduced by the factor listed in Table G3.2 is 10% for occupancy sensor in buildings greater than 5000 ft2.  So would the LPD for the baseline conference room be 1.23 * 0.9 = 1.1?

Thanks for your assistance!


Christopher Jones, P.Eng.
Tel: 416.644.4226 * Toll Free: 1.888.425.7255 x 527


______________________________________________________________________
NOTICE: This communication and any attachments ("this message") may contain confidential information for the sole use of the intended recipient(s). Any unauthorized use, disclosure, viewing, copying, alteration, dissemination or distribution of, or reliance on this message is strictly prohibited. If you have received this message in error, or you are not an authorized recipient, please notify the sender immediately by replying to this message, delete this message and all copies from your e-mail system and destroy any printed copies.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20140925/9913c329/attachment-0001.htm>


More information about the Bldg-sim mailing list