Re: [EnergyPlus_Support] moisture transfer test

["Richard J. Liesen" <r-liesen@xxxxxxxx>]

Hello,
The algorithms have been tested and verified as per
"Liesen, R.J. and Pedersen,
C.O., "Modeling the Energy Effects of Combined Heat and Mass
Transfer in Building Elements; Part 1, Theory", ASHRAE Transactions,
1999".  These algorithms were then installed identically
in EnergyPlus as they were installed in the research version of
BLAST.  The tests were against the program from FSEC, MOIST from
NIST, and analytical solutions.  No direct test files are
available.

Thanks Richard Liesen


At 01:31 PM 6/17/2002, habaza11@xxxxxx wrote:
> Hi;
> Had the moisture trasfer analysis in energy plus been tested and
> validated?. If the answer is yes, could you please tell against wich
> software it had been tested, and if this test is availabe.
> thank you.
>
> H. Abaza
>
>
> To unsubscribe from this group, send an email to:
> EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
>
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
>
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to the
> Yahoo! Terms of
> Service. 

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/






Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.