[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: Control Type Schedules
Mike,
The control strategy used in the DXSys.idf example worked well. I am
up and running!
Michelle
--- In EnergyPlus_Support@y..., "Michael J. Witte" <mjwitte@g...>
wrote:
> In the DXSys.idf example, a SET POINT MANAGER:OUTSIDE AIR object
is
> used to directly set the leaving cooling coil temperature based on
> outside air temperature. That example is set up as a blow-thru
> system, so there is no need to adjust the setpoint for the supply
fan
> temperature rise.
>
>
> On 29 Aug 2002, at 18:03, belleengr wrote:
>
> > Mike,
> >
> > You mentioned the controls in the example are complicated. Is
there
> > an easier way to control the system?
> >
> > Michelle
>
>
> ========================================================
> EnergyPlus Testing and Support
> EnergyPlus-Support@g...
------------------------ Yahoo! Groups Sponsor ---------------------~-->
4 DVDs Free +s&p Join Now
http://us.click.yahoo.com/pt6YBB/NXiEAA/MVfIAA/dkFolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/