Re: [EnergyPlus_Support] Two plans

["Michael J. Witte" <mjwitte@xxxxxxxx>]

The surface must be described twice, once in each zone.  In the lower 
zone, it is a ceiling.  In the upper zone it is a floor.

Mike



On 16 Dec 2002, at 17:23, Cristina Castaño/LABEIN wrote:

> Hi,
> 
> What is the Surface Type of the floor between two plans of a
> building?, because the roof of one plan is the floor of the other
> plan.
> 
> 
> Best regards,
> Cristina
> 
> 
> ------------------------ Yahoo! Groups Sponsor
> ---------------------~--> Get 128 Bit SSL Encryption!
> http://us.click.yahoo.com/CBxunD/vN2EAA/xGHJAA/dkFolB/TM
> ---------------------------------------------------------------------~
> ->
> 
> To unsubscribe from this group, send an email to:
> EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
> 
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
> 
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
> 
> Attachments are not allowed -- please post any files to the
> appropriate folder in the Files are of the Support Web Site.
> 
> 
> 
> 
> 
> 
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/ 
> 



========================================================
EnergyPlus Testing and Support      
EnergyPlus-Support@xxxxxxxx