Re: [EnergyPlus_Support] Transient simulation of building structure and indoor air

[Linda Lawrie <linda@xxxxxxxxxx>]

At 05:05 PM 1/16/2003, lengjing lengjing wrote:

>Step 1 was successful. However, Step 2 was not. When I
>changed some values in csv and tried to convert it
>back to epw, there was an error message and no epw
>file was created. The original epw file I used was
>directly downloaded from the website of EnergyPlus.
>Step 2 failed Even I just retyped the same value in a
>cell and save it without changing anything in the csv.

#1.  What was the error message?

#2.  A new EPlusWth.DLL was recently uploaded to the Files area here -- 
were you using that?


Linda

EnergyPlus WebSite: http://www.energyplus.gov
Owner: EnergyPlus_Support list
Member: EnergyPlus Development Team



------------------------ Yahoo! Groups Sponsor ---------------------~-->
Turn flat surfaces into speakers with the Soundbug.
http://us.click.yahoo.com/QWAVSC/onCFAA/xGHJAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/