[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] inputting surfaces' geometry & dimensions
Dear Sirs:
When inputting surfaces' geometry, should we refer to dimensions from
axis to axis or should we refer to the dimensions of the inner
surface of the construction element? We have noticed that zone
volume is calculated as if the inputted dimensions are those of the
inner surfaces but then, how are differences in thickness of the
envelope's construction elements handled?
Please advise us.
Thanks
Dr. Monica Paciuk
Itamar Goldberger
------------------------ Yahoo! Groups Sponsor ---------------------~-->
Rent DVDs from home.
Over 14,500 titles. Free Shipping
& No Late Fees. Try Netflix for FREE!
http://us.click.yahoo.com/BVVfoB/hP.FAA/ySSFAA/dkFolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/