[EnergyPlus_Support] Airflow inside of walls

["Christian" <c_eulitz@xxxxxxxx>]

Hello,

my problem is to simulate a zone with Energy+, being built of 1 wall
facing outside environment and the 3 other walls, the roof and the 
floor of the cubic zone have adiabatic conditions. The outside facing 
wall and one of the adiabatic walls have the same surface sandwich-
construction made of several layers: The material of the outside 
Layer is something like tales, the #1-layer should be air with 
airflow an the #2-layer is concrete and so on.

How can I consider the airflow in these walls for my thermal 
simulation?

I tried to build the #1 layer by defining the Material Air at the
Surface Construction Elements, but this only allows specifying the 
name and the thermal resistance.


Best regards


Christian Eulitz
staatl. gepr. Umweltschutztechniker
-----------------------------------------
Möhler + Partner Beratende Ingenieure für Schallschutz und Bauphysik
-----------------------------------------
Kopernikusstraße 7
D - 85609 Aschheim
Germany
Tel. +49(0)89 90490272
e-Mail c_eulitz@xxxxxxxx




------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for Your HP, Epson, Canon or Lexmark
Printer at Myinks.com. Free s/h on orders $50 or more to the US & Canada. http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/l.m7sD/LIdGAA/qnsNAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/