[EnergyPlus_Support]

["Samuel Roose" <samuel.roose@xxxxxxxxx>]

I am puzzled about how to specify return air fans as part of an air loop. The attached file is an attempt at this based on Figure 43 of the Input - Output reference. The intention is to flow through the outside air system to supply fans, cooling coil, humidifier, zone and then return the air back to the outside air system somehow. The file runs fine without the return fans. Has anyone had any success with return air fans? If so, please peruse the file (particularly the main air loop branch and fans input). I would appreciate any feedback. Thanks,
Sam Roose
Victoria University of Wellington


[Non-text portions of this message have been removed]


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for Your HP, Epson, Canon or Lexmark
Printer at Myinks.com. Free s/h on orders $50 or more to the US & Canada. http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/l.m7sD/LIdGAA/qnsNAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/