[EnergyPlus_Support] several questions

["staryhy2000" <staryhy2000@xxxxxxxxxxxx>]

    1.I had simulated the cooling loads of a building only with exter 
wall and window but without any internal interference,why did the 
result(such as Zone/Sys Sensible Cooling Rate[W] and Purchased Air 
Sensible Cooling Rate[W](Hourly)) equal to zero? Surface Ext 
convection coeff is about 5W/m2K£¬Weather is the number too low? 
    2.If I only want to simulate a room of a building, how should I 
set a interwall£»Where does ground temperatures come from£¿
    Thank you for your help£¡



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
     EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/