Re: [EnergyPlus_Support] Double Skin Buildings

[Linda Lawrie <linda@xxxxxxxxxx>]

At 12:12 PM 5/2/2004, Samuel Hassid wrote:
>My best solution would have been if I could use with MIXING a MIXING RATE 
>which depends on the temperature difference and can be stopped if the 
>temperature difference is less than, say, two degrees. This is something 
>that can be done with VENTILLATION but not with MIXING. Does any one know 
>a way around this difficulty ?

Both Mixing and Cross-Mixing have a delta temperature attached but depend 
on zone temperature to show the difference.  Is that what you need?


Linda

EnergyPlus WebSite: http://www.energyplus.gov
Owner: EnergyPlus_Support list
Member: EnergyPlus Development Team



[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
     EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/