[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: Problem with the error messages for my IDF file






wing sun lee <samwslee@xxxxxxxxxxxx> wrote:Dear Michael,
 
I have already downloaded the latest vesion 1.2.1, but there are still many error that after simulate with my idf file.
 
Would you mind assisting me to address such problem.
 
I am looking forward to you.
 
SAMLEE
 
 






借過、一拍兩散、奇洛李維斯回信...
全港最大手機下載中心
http://mobile.yahoo.com.hk/


> ATTACHMENT part 2 application/x-zip-compressed name=HK89TMY.zip
!-Generator IDFEditor 1.20

!-NOTE: All comments with '!-' are ignored by the IDFEditor and are generated automatically.
!- Use '!' comments if they need to be retained when using the IDFEditor.


!- =========== ALL OBJECTS IN CLASS: VERSION ===========

! VAVSingleDuctReheat.IDF
! Basic file description: Basic test of a very simple VAV system. This file is more or less
! identical to the TermReheat.idf file except that a VAV fan has
! replace the constant volume fan and dampers with controls have
! been added to the zone equipment loop.
! Run: 2 design days.
! Building: Fictional 3 zone building with interzone partitions connecting all zones together.
! No ground contact (all floors are "partitions"). Roofs exposed to outdoor environment.
! There is one single pane window.
! Internal: People, equipment, and lighting all at approximately "normal" levels and schedules.
! System: 3 zone variable air volume system using a single air loop. Controlled about like the old
! BLAST "NWS2" control profile. Heating up to 20 C during occupied hours, 15 C otherwise.
! Cooling to 24 C while occupied, 30 C otherwise. Fans and coils scheduled to be unavailable
! during unoccupied hours. Cooling coil off all winter. Reheat coil on all year.
! System configuration is very basic--air loop has a fan and cooling coil, each zone leg has
! nothing more than a reheat coil.
! Plant: Heating loop served by purchased heating. Cooling loop served by two different types of
! chillers and purchased cooling. Priority based controls determine which piece of equipment
! tries to meet the load.
! SolDis=FullInteriorAndExterior, Aniso, Detailed Interior and Exterior Convection
VERSION,
1.2.0; !- Version Identifier


!- =========== ALL OBJECTS IN CLASS: BUILDING ===========

BUILDING,
Aberdeen Police Training School (New Training Block), !- Building Name
3, !- North Axis {deg}
City, !- Terrain
3.9999999E-02, !- Loads Convergence Tolerance Value {W}
0.4000000, !- Temperature Convergence Tolerance Value {deltaC}
MinimalShadowing, !- Solar Distribution
25; !- Maximum Number of Warmup Days


!- =========== ALL OBJECTS IN CLASS: TIMESTEP IN HOUR ===========

TIMESTEP IN HOUR,
6; !- Time Step in Hour


!- =========== ALL OBJECTS IN CLASS: INSIDE CONVECTION ALGORITHM ===========

INSIDE CONVECTION ALGORITHM,
Detailed; !- InsideConvectionValue


!- =========== ALL OBJECTS IN CLASS: OUTSIDE CONVECTION ALGORITHM ===========

OUTSIDE CONVECTION ALGORITHM,
Detailed; !- OutsideConvectionValue


!- =========== ALL OBJECTS IN CLASS: SOLUTION ALGORITHM ===========

SOLUTION ALGORITHM,
CTF; !- SolutionAlgo


!- =========== ALL OBJECTS IN CLASS: ZONE VOLUME CAPACITANCE MULTIPLIER ===========

ZONE VOLUME CAPACITANCE MULTIPLIER,
1.0; !- Capacitance Multiplier


!- =========== ALL OBJECTS IN CLASS: RUN CONTROL ===========

RUN CONTROL,
Yes, !- Do the zone sizing calculation
Yes, !- Do the system sizing calculation
Yes, !- Do the plant sizing calculation
No, !- Do the design day simulations
Yes; !- Do the weather file simulation


!- =========== ALL OBJECTS IN CLASS: RUNPERIOD ===========

RunPeriod,
1, !- Begin Month
1, !- Begin Day Of Month
12, !- End Month
31, !- End Day Of Month
Thursday, !- Day Of Week For Start Day
Yes, !- Use WeatherFile Holidays/Special Days
Yes, !- Use WeatherFile DaylightSavingPeriod
No, !- Apply Weekend Holiday Rule
Yes, !- Use WeatherFile Rain Indicators
Yes, !- Use WeatherFile Snow Indicators
0; !- Number of years of simulation


!- =========== ALL OBJECTS IN CLASS: LOCATION ===========

Location,
Aberdeen Police Training School, !- LocationName
22.3, !- Latitude {deg}
114.16, !- Longitude {deg}
8, !- TimeZone {hr}
23.8; !- Elevation {m}


!- =========== ALL OBJECTS IN CLASS: DESIGNDAY ===========

DesignDay,
HONG KONG SUMMER, !- DesignDayName
33.5, !- Maximum Dry-Bulb Temperature {C}
4.8, !- Daily Temperature Range {deltaC}
27, !- Humidity Indicating Temperature at Max Temp {C}
99433.54, !- Barometric Pressure {Pa}
5.4, !- Wind Speed {m/s}
230, !- Wind Direction {deg}
.38, !- Sky Clearness
0, !- Rain Indicator
0, !- Snow Indicator
21, !- Day Of Month
7, !- Month
SummerDesignDay, !- Day Type
0, !- Daylight Saving Time Indicator
Dew-Point; !- Humidity Indicating Temperature Type

DesignDay,
HONG KONG WINTER, !- DesignDayName
7, !- Maximum Dry-Bulb Temperature {C}
4.1, !- Daily Temperature Range {deltaC}
-4.5, !- Humidity Indicating Temperature at Max Temp {C}
99433.54, !- Barometric Pressure {Pa}
7.2, !- Wind Speed {m/s}
60, !- Wind Direction {deg}
.44, !- Sky Clearness
0, !- Rain Indicator
0, !- Snow Indicator
21, !- Day Of Month
1, !- Month
WinterDesignDay, !- Day Type
0, !- Daylight Saving Time Indicator
Dew-Point; !- Humidity Indicating Temperature Type


!- =========== ALL OBJECTS IN CLASS: GROUNDTEMPERATURES ===========

GroundTemperatures,
20.03, !- January Ground Temperature {C}
20.03, !- February Ground Temperature {C}
20.13, !- March Ground Temperature {C}
20.30, !- April Ground Temperature {C}
20.43, !- May Ground Temperature {C}
20.52, !- June Ground Temperature {C}
20.62, !- July Ground Temperature {C}
20.77, !- August Ground Temperature {C}
20.78, !- September Ground Temperature {C}
20.55, !- October Ground Temperature {C}
20.44, !- November Ground Temperature {C}
20.20; !- December Ground Temperature {C}


!- =========== ALL OBJECTS IN CLASS: MATERIAL:REGULAR ===========

MATERIAL:REGULAR,
10mm cement/sand render, !- Name
Smooth, !- Roughness
.01, !- Thickness {m}
.72, !- Conductivity {W/m-K}
1548.2, !- Density {kg/m3}
836.8000, !- Specific Heat {J/kg-K}
0.9000000, !- Absorptance:Thermal
0.9200000, !- Absorptance:Solar
0.9200000; !- Absorptance:Visible

MATERIAL:REGULAR,
100mm common brick, !- Name
Rough, !- Roughness
.1, !- Thickness {m}
.726, !- Conductivity {W/m-K}
1922.2, !- Density {kg/m3}
836.8000, !- Specific Heat {J/kg-K}
0.9000000, !- Absorptance:Thermal
0.7600000, !- Absorptance:Solar
0.7600000; !- Absorptance:Visible

MATERIAL:REGULAR,
19mm gypsum plaster, !- Name
Smooth, !- Roughness
.019, !- Thickness {m}
.726, !- Conductivity {W/m-K}
1601.8, !- Density {kg/m3}
836.8000, !- Specific Heat {J/kg-K}
0.9000000, !- Absorptance:Thermal
0.9200000, !- Absorptance:Solar
0.9200000; !- Absorptance:Visible

MATERIAL:REGULAR,
150mm HW concrete, !- Name
MediumRough, !- Roughness
.15, !- Thickness {m}
2.16, !- Conductivity {W/m-K}
2242.6, !- Density {kg/m3}
836.8000, !- Specific Heat {J/kg-K}
0.9000000, !- Absorptance:Thermal
.83, !- Absorptance:Solar
.83; !- Absorptance:Visible

MATERIAL:REGULAR,
200mm HW concrete, !- Name
MediumRough, !- Roughness
.2, !- Thickness {m}
1.73, !- Conductivity {W/m-K}
2242.6, !- Density {kg/m3}
836.8, !- Specific Heat {J/kg-K}
0.9000000, !- Absorptance:Thermal
.83, !- Absorptance:Solar
.83; !- Absorptance:Visible

MATERIAL:REGULAR,
13mm slag or stone, !- Name
Rough, !- Roughness
.013, !- Thickness {m}
1.44, !- Conductivity {W/m-K}
881, !- Density {kg/m3}
1673.600, !- Specific Heat {J/kg-K}
0.9000000, !- Absorptance:Thermal
0.5500000, !- Absorptance:Solar
0.5500000; !- Absorptance:Visible

MATERIAL:REGULAR,
10mm felt/membrane, !- Name
Rough, !- Roughness
.01, !- Thickness {m}
.19, !- Conductivity {W/m-K}
1121.3, !- Density {kg/m3}
1673.600, !- Specific Heat {J/kg-K}
0.9000000, !- Absorptance:Thermal
0.7500000, !- Absorptance:Solar
0.7500000; !- Absorptance:Visible

MATERIAL:REGULAR,
25mm dense insulation, !- Name
VeryRough, !- Roughness
.025, !- Thickness {m}
.043, !- Conductivity {W/m-K}
91.3, !- Density {kg/m3}
836.8000, !- Specific Heat {J/kg-K}
0.9000000, !- Absorptance:Thermal
0.5000000, !- Absorptance:Solar
0.5000000; !- Absorptance:Visible


!- =========== ALL OBJECTS IN CLASS: MATERIAL:WINDOWGLASS ===========

MATERIAL:WINDOWGLASS,
Window, !- Name
SpectralAverage, !- Optical Data Type
, !- Name of Window Glass Spectral Data Set
0.003, !- Thickness {m}
0.90, !- Solar Transmittance at Normal Incidence
0.031, !- Solar Reflectance at Normal Incidence: Front Side
0.031, !- Solar Reflectance at Normal Incidence: Back Side
0.90, !- Visible Transmittance at Normal Incidence
0.05, !- Visible Reflectance at Normal Incidence: Front Side
0.05, !- Visible Reflectance at Normal Incidence: Back Side
0.0, !- IR Transmittance at Normal Incidence
0.84, !- IR Hemispherical Emissivity: Front Side
0.84, !- IR Hemispherical Emissivity: Back Side
0.9; !- Conductivity {W/m-K}


!- =========== ALL OBJECTS IN CLASS: CONSTRUCTION ===========

CONSTRUCTION,
External wall, !- Name
10mm cement/sand render, !- Outside Layer
150mm HW concrete, !- Layer #2
19mm gypsum plaster; !- Layer #3

CONSTRUCTION,
Staircase wall, !- Name
19mm gypsum plaster, !- Outside Layer
200mm HW concrete, !- Layer #2
19mm gypsum plaster; !- Layer #3

CONSTRUCTION,
Partition, !- Name
19mm gypsum plaster, !- Outside Layer
100mm common brick, !- Layer #2
19mm gypsum plaster; !- Layer #3

CONSTRUCTION,
Floor, !- Name
19mm gypsum plaster, !- Outside Layer
150mm HW concrete, !- Layer #2
19mm gypsum plaster; !- Layer #3

CONSTRUCTION,
Roof, !- Name
13mm slag or stone, !- Outside Layer
100mm common brick, !- Layer #2
25mm dense insulation, !- Layer #3
150mm HW concrete, !- Layer #4
19mm gypsum plaster; !- Layer #5

CONSTRUCTION,
Window 1, !- Name
Window; !- Outside Layer


!- =========== ALL OBJECTS IN CLASS: ZONE ===========

! NAME OF OBJECT
ZONE,
Zone LG-3, !- Zone Name
! FIELD Relative North (to building)
0, !- Relative North (to building) {deg}
! FIELD Origin - Item 1
100.337639, !- X Origin {m}
! FIELD Origin - Item 2
49.337914, !- Y Origin {m}
! FIELD Origin - Item 3
0.000000, !- Z Origin {m}
! FIELD Type
1, !- Type
! FIELD Multiplier
1, !- Multiplier
! FIELD Ceiling Height
2.7; !- Ceiling Height {m}

! NAME OF OBJECT
ZONE,
Zone LG-2, !- Zone Name
! FIELD Relative North (to building)
0, !- Relative North (to building) {deg}
! FIELD Origin - Item 1
100.337639, !- X Origin {m}
! FIELD Origin - Item 2
30.987913, !- Y Origin {m}
! FIELD Origin - Item 3
0.000000, !- Z Origin {m}
! FIELD Type
1, !- Type
! FIELD Multiplier
1, !- Multiplier
! FIELD Ceiling Height
2.7; !- Ceiling Height {m}

! NAME OF OBJECT
ZONE,
Zone LG-1, !- Zone Name
! FIELD Relative North (to building)
0, !- Relative North (to building) {deg}
! FIELD Origin - Item 1
91.337639, !- X Origin {m}
! FIELD Origin - Item 2
38.187916, !- Y Origin {m}
! FIELD Origin - Item 3
0.000000, !- Z Origin {m}
! FIELD Type
1, !- Type
! FIELD Multiplier
1, !- Multiplier
! FIELD Ceiling Height
2.7; !- Ceiling Height {m}

! NAME OF OBJECT
ZONE,
Zone LG-5, !- Zone Name
! FIELD Relative North (to building)
0, !- Relative North (to building) {deg}
! FIELD Origin - Item 1
82.385262, !- X Origin {m}
! FIELD Origin - Item 2
34.837914, !- Y Origin {m}
! FIELD Origin - Item 3
0.000000, !- Z Origin {m}
! FIELD Type
1, !- Type
! FIELD Multiplier
1, !- Multiplier
! FIELD Ceiling Height
2.7; !- Ceiling Height {m}

! NAME OF OBJECT
ZONE,
Zone LG-6, !- Zone Name
! FIELD Relative North (to building)
0, !- Relative North (to building) {deg}
! FIELD Origin - Item 1
84.265640, !- X Origin {m}
! FIELD Origin - Item 2
36.337914, !- Y Origin {m}
! FIELD Origin - Item 3
0.000000, !- Z Origin {m}
! FIELD Type
1, !- Type
! FIELD Multiplier
1, !- Multiplier
! FIELD Ceiling Height
2.7; !- Ceiling Height {m}

! NAME OF OBJECT
ZONE,
Zone LG-4, !- Zone Name
! FIELD Relative North (to building)
0, !- Relative North (to building) {deg}
! FIELD Origin - Item 1
100.337639, !- X Origin {m}
! FIELD Origin - Item 2
55.172913, !- Y Origin {m}
! FIELD Origin - Item 3
0.000000, !- Z Origin {m}
! FIELD Type
1, !- Type
! FIELD Multiplier
1, !- Multiplier
! FIELD Ceiling Height
2.7; !- Ceiling Height {m}

! NAME OF OBJECT
ZONE,
Zone LG-7, !- Zone Name
! FIELD Relative North (to building)
0, !- Relative North (to building) {deg}
! FIELD Origin - Item 1
91.787643, !- X Origin {m}
! FIELD Origin - Item 2
60.572914, !- Y Origin {m}
! FIELD Origin - Item 3
0.000000, !- Z Origin {m}
! FIELD Type
1, !- Type
! FIELD Multiplier
1, !- Multiplier
! FIELD Ceiling Height
2.7; !- Ceiling Height {m}

! NAME OF OBJECT
ZONE,
Zone LG-EX1, !- Zone Name
! FIELD Relative North (to building)
0, !- Relative North (to building) {deg}
! FIELD Origin - Item 1
82.385262, !- X Origin {m}
! FIELD Origin - Item 2
30.987913, !- Y Origin {m}
! FIELD Origin - Item 3
0.000000, !- Z Origin {m}
! FIELD Type
1, !- Type
! FIELD Multiplier
1, !- Multiplier
! FIELD Ceiling Height
2.7; !- Ceiling Height {m}

! NAME OF OBJECT
ZONE,
Zone LG-EX2, !- Zone Name
! FIELD Relative North (to building)
0, !- Relative North (to building) {deg}
! FIELD Origin - Item 1
98.737640, !- X Origin {m}
! FIELD Origin - Item 2
76.012917, !- Y Origin {m}
! FIELD Origin - Item 3
0.000000, !- Z Origin {m}
! FIELD Type
1, !- Type
! FIELD Multiplier
1, !- Multiplier
! FIELD Ceiling Height
2.7; !- Ceiling Height {m}


!- =========== ALL OBJECTS IN CLASS: SURFACEGEOMETRY ===========

SurfaceGeometry,
LowerLeftCorner, !- SurfaceStartingPosition
CounterClockWise, !- VertexEntry
WorldCoordinateSystem; !- CoordinateSystem


!- =========== ALL OBJECTS IN CLASS: SURFACE:HEATTRANSFER ===========

! NAME OF OBJECT
Surface:HeatTransfer,
Wall LG 0, !- User Supplied Surface Name
! FIELD Surface Type
WALL, !- Surface Type
! FIELD Construction Name of the Surface
Staircase wall, !- Construction Name of the Surface
! FIELD Inside Face Environment
Zone LG-3, !- InsideFaceEnvironment
! FIELD Outside Face Environment
OtherZoneSurface, !- OutsideFaceEnvironment
! FIELD Outside Face Environment Object
Wall LG 26, !- OutsideFaceEnvironment Object
! FIELD Sun Exposure
NoSun, !- Sun Exposure
! FIELD Wind Exposure
NoWind, !- Wind Exposure
! FIELD View Factor to Ground
0, !- View Factor to Ground
! FIELD Number of Surface Vertices
4, !- Number of Surface Vertex Groups -- Number of (X,Y,Z) groups in this surface
! FIELD Surface Vertices List - Item 1
100.337639, !- Vertex 1 X-coordinate {m}
! FIELD Surface Vertices List - Item 2
49.337914, !- Vertex 1 Y-coordinate {m}
! FIELD Surface Vertices List - Item 3
0.000000, !- Vertex 1 Z-coordinate {m}
! FIELD Surface Vertices List - Item 4
107.637642, !- Vertex 2 X-coordinate {m}
! FIELD Surface Vertices List - Item 5
49.337914, !- Vertex 2 Y-coordinate {m}
! FIELD Surface Vertices List - Item 6
0.000000, !- Vertex 2 Z-coordinate {m}
! FIELD Surface Vertices List - Item 7
107.637642, !- Vertex 3 X-coordinate {m}
! FIELD Surface Vertices List - Item 8
49.337914, !- Vertex 3 Y-coordinate {m}
! FIELD Surface Vertices List - Item 9
4.000000, !- Vertex 3 Z-coordinate {m}
! FIELD Surface Vertices List - Item 10

=== message truncated ===


借過、一拍兩散、奇洛李維斯回信...
全港最大手機下載中心
http://mobile.yahoo.com.hk/


[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
$9.95 domain names from Yahoo!. Register anything.
http://us.click.yahoo.com/J8kdrA/y20IAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/