Re: [EnergyPlus_Support] Multi-sided (>4) surfaces in VoloView

[Linda Lawrie <linda@xxxxxxxxxx>]

At 11:31 AM 10/14/2004, mrwassmer wrote:
>- Is it true that many-sided surfaces are now permitted in V1.2.1?

Yes

>- Why is there a problem in VoloView?

There is not a "problem" with Voloview.  >4 sided surfaces show as a 
thicker line (a polyline) rather than a "3dface" option.  I could not 
figure out how to make a multi-sided surface show as a "face" so I chose to 
make it a thicker line with the same color as the surface class.

If anyone can tell me how to make a polygon face in DXF commands, I would 
be glad to change it!


Linda

EnergyPlus WebSite: http://www.energyplus.gov
Owner: EnergyPlus_Support list
Member: EnergyPlus Development Team



[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/