[EnergyPlus_Support] Temperature error in eplus results

["cmsoliveira2004" <cmsoliveira@xxxxxxx>]

Hi,

I'm doing a simulation of a building, were i pretend to know the
loads. I belive all the input is ok but whe i analise the results the
zone temperature is, sometimes, way off from what i've specified in
the schedules.(BTW, using a control type =4)

What i want is, when in occupation 21ºC and the rest (including
weekends)at 17 ºC - this is for Winter.

For Summer: 24ºC when in occupation and 28ºC at non-occupation.

I also believe my schedules are correct. They were done using the
examples that came with EPlus.

I've uploaded my idf file as projecto15.zip.

If someone could help, i'd be appriciated.


 





------------------------ Yahoo! Groups Sponsor --------------------~--> 
$9.95 domain names from Yahoo!. Register anything.
http://us.click.yahoo.com/J8kdrA/y20IAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/