[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] VAV system severe error





Hi, all:

I have another problem by simulating a VAV system, this VAV system then supply air to 9 different zones.  The perimeter zones have both reheat coils and perimeter radiant heating panel both ( I simulate the radiant panel as baseboard heating).

But I always find that there are two zones can not be connected to the system, and I always get this information " Node ZONE 1-LOB-E DAMPER INLET NODE connects to no component".  This node is the " unit air inlet node".  But the problem is that all the input node of these two zones are the same as other zones.  

Can anybody give me a hint?  Thanks a lot.

Regards,

Zhen

		
---------------------------------
Do you Yahoo!?
 Read only the mail you want - Yahoo! Mail SpamGuard.

[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
$4.98 domain names from Yahoo!. Register anything.
http://us.click.yahoo.com/Q7_YsB/neXJAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/