[EnergyPlus_Support] daily temperature range

[ogocer@xxxxxxxxxxxxxx]

Dear all,
Linda thanks for your reply.
I made a simulation for a design day and i asked for dry bulb outside
temperature. In output reports it gave me same temperature for all hours
(that i specified in maximum dry bulb temperature)  But daily temperature
range was zero. Then i changed daily temperature range by finding the
difference between maximum and minimum temperatures from Istanbul weather
data for the design day. (7 - 5 = 2 centigrate degree)
and in output reports i saw changes in temperatures. am i right in doing
that process?

But i didn't define dry bulb temperature range modifier type. Is it
necessary to define it?
thanks for all.


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/