[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Problems about heatpump



Dear all:
   I want to simulate a double-heatpump system. It is that there are 
two heatpump systems which are used in the cold cities. When the 
outside air temperature is -5¡æ or below ,the two heatpump systems 
run together ,otherwise only one system runs.
   In my simulation, the two heatpump systems are AIR-WATER and WATER-
WATER. But in the IDD, there are only AIR-AIR and WATER-AIR. How 
should I deal with my system?
   Wish your help!
   Thanks a lot!






The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/