[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Surface in middle zones..





Hi,
While specifying a surface within zone; I get the following error: [ I am
trying to model a middle floor by making the floor the Outside Face
Environment Object for the ceiling; and the ceiling the Outside Face
Environment Object for the floor.]



Program Version,EnergyPlus 1.2.1.022, 1/27/2005 5:59 PM,IDD_Version
1.2.1.022
   ** Severe  ** CAUTION -- Interzone surfaces are usually in different
zones
   **   ~~~   ** Surface=F-P1I, Zone=PER-1I
   **   ~~~   ** Surface=C-P1I, Zone=PER-1I
   ** Severe  ** CAUTION -- Interzone surfaces are usually in different
zones
   **   ~~~   ** Surface=F-P2I, Zone=PER-2I
   **   ~~~   ** Surface=C-P2I, Zone=PER-2I


These changes were made in the example file - lgOffVAV.dxf. Do I need to
make any other changes?

Thanks

Mahabir



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/