Re: [EnergyPlus_Support] complex buildings

["Michael J. Witte" <mjwitte@xxxxxxxx>]

EnergyPlus only models flat polygonal surfaces.  Curved walls and domes must be 
modeled as a series of flat surfaces.  For a curved wall, this is fairly easy 
to do.  A dome is more difficult.

Mike


On 1 Apr 2005, at 5:57, mohammed khaylani wrote:

> 
> hi
> i was just wondering if energy plus is able to deal with curved walls or domes
> in complexed building? and if yes then HOW? thanks mohammed s. k.
> 
> 
> ---------------------------------
> Do you Yahoo!?
>  Better first dates. More second dates. Yahoo! Personals 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
> 
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
> 
> Attachments are not allowed -- please post any files to the appropriate folder
> in the Files area of the Support Web Site.
> 
> Yahoo! Groups Links
> 
> 
> 
> 
> 
> 
> 
> 
> 



========================================================
Michael J. Witte, GARD Analytics, Inc.
EnergyPlus Testing and Support      
EnergyPlus-Support@xxxxxxxx




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/