Re: [EnergyPlus_Support] comis wind conditions

["Joe Huang" <yjhuang@xxxxxxx>]

COMIS gets the wind speed and direction from the weather file. However, to
translate that to wind pressures on the building and building openings, the
user must input Pressure Coefficients for each facade by wind direction.
For simple box geometries, EnergyPus has a feature to calculate Pressure
Coefficients automatically using equations developed from wind tunnel tests.

Joe Huang

----- Original Message ----- 
From: <ogocer@xxxxxxxxxxxxxx>
To: <EnergyPlus_Support@xxxxxxxxxxxxxxx>
Sent: Monday, May 16, 2005 1:58 AM
Subject: [EnergyPlus_Support] comis wind conditions


> Dear all,
> in comis air flow is it necessary to define the wind condition, and if i
> don't define, does the program get wind condition from weather file?
> thanks alot
> ozgur gocer
>
>
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
>
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
>
> Attachments are not allowed -- please post any files to the appropriate
folder in the Files area of the Support Web Site.
>
> Yahoo! Groups Links
>
>
>
>
>
>
>



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/