[EnergyPlus_Support] comis network error

[ogocer@xxxxxxxxxxxxxx]

Dear all,
i have simulated two story building. In front of it there is a two story
height zone. and i defined comis air flow between these three zones
without specifing any active system. it gave an error as in below. Because
it is a rectangular building i didn't specify external nodes. i defined
the openings on adjacent surface as comis openings (these are windows and
doors) how can i solve this problem. thanks alot
ozgur gocer



NETWORK ERROR
  &-NET-ZONe contains  3  zones.
  At least one of the zones should be connected to a known pressure.
  Two kinds of known pressures exist:
   - external nodes. These have a negative number in &-NET-LINks
   - special pressures. These have a form like nn.nPa (nn.n=a REAL number)
  You have to add such a link to the network.


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/