Re: [EnergyPlus_Support] About the design cool mass flow

[fred buhl <wfbuhl@xxxxxxx>]

These are the "calculated" results of the zone sizing calculations in 
EnergyPlus. You can read about
these calculations in the Engineering Documentation. The purpose of the 
sizing calculation is to obtain
for each zone a calculated design flow rate for cooling and a calculated 
design flow rate for heating.
Also design heating & cooling loads for each zone. The zsz file shows 
the design flow sequences. They
are useful for plotting to see the load or design flow shapes over a 
day. You can not change the report frequency.

Fred

energypluser wrote:

>Dear all
>  
>what is the meaning of the design cool/heat mass flow in eplszsz.csv?
>Can i change the report frequency of the eplszsz.csv?
>How to do it ?
>Thank you in advance!
>
>
>
>
>
>
>The primary EnergyPlus web site is found at:
>http://www.energyplus.gov
>
>The group web site is:
>http://groups.yahoo.com/group/EnergyPlus_Support/
>
>Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
> 
>Yahoo! Groups Links
>
>
>
> 
>
>
>  
>


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/