[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Base surface does not surround subsurface

Hi Christian,

I believe it's that your roof coordinates are not in the LLC, CCW, relative 
terms as set in the surfacegeometry.

If you put the roof in as:

     G.000.Roof.5,            !- User Supplied Surface Name
     Roof,                    !- Surface Type
     massive roof,            !- Construction Name of the Surface
     G.000,                   !- InsideFaceEnvironment
     ExteriorEnvironment,     !- OutsideFaceEnvironment
     ,                        !- OutsideFaceEnvironment Object
     SunExposed,              !- Sun Exposure
     WindExposed,             !- Wind Exposure
     0.0000,                  !- View Factor to Ground
     4,                       !- Number of Surface Vertex Groups -- Number 
of (X,Y,Z) groups in this surface
!- X,Y,Z ==> Vertex 4
!- X,Y,Z ==> Vertex 1
!- X,Y,Z ==> Vertex 2
!- X,Y,Z ==> Vertex 3

The error message goes away.

(Note I just used yours so the Vertex comments are incorrect).


EnergyPlus WebSite: http://www.energyplus.gov
Owner: EnergyPlus_Support list
Member: EnergyPlus Development Team

[Non-text portions of this message have been removed]

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: