Re: [EnergyPlus_Support] CTF calculation convergence error

[Linda Lawrie <linda@xxxxxxxxxx>]

The "old" way we would circumvent this kind of error would be to make 
a wall construction that was multiple of the "almost too thick" 
structures.  You would have to decide if the numbers you were getting 
that way were appropriate.

At 05:22 PM 7/18/2005, manu_paccs wrote:

>Tweaking k and c allows for limited increase of soil wall/ceiling
>thickness but the thermal lag of the zone decreases. The error occurs
>using 1 hr or 6 hr timesteps. Can the wall thickness limitation be
>circumvented?

I assume you don't mean 6 hr time steps but 6 timesteps per hour.


Linda

EnergyPlus WebSite: http://www.energyplus.gov
Owner: EnergyPlus_Support list
Member: EnergyPlus Development Team



[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/