[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] About the zoning approach of perimeter and interior zone without the walls
Thank you for your reply. But I still fell confused with the zoning problem.
If there is no wall to divide the story into zones, how can I specify the HVAC system for
each zone to satisfy the heating and cooling load?
Based on the description of Mixing concept in E+, it accounts for the air flow mixing
between two thermal zones which are divided by interior walls.
Am I right?
How can I decide the geometric size of the perimeter zone and interior zone?
And I think the dxf file would not show the boundary of the two zones at all.
Is it correct?
Thank you in advance
The primary EnergyPlus web site is found at:
The group web site is:
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to: