RE: [EnergyPlus_Support] Ground levels

["Andy Tindale" <andy@xxxxxxxxxxxxxxxxxxx>]

You can do different ground levels in DesignBuilder. By default all floor
surfaces at ground level are considered to be in contact with the ground as
indicated by the 'Adjacent to ground?' data on the construction tab at
surface level.  If any other surfaces are also in contact with the ground,
just check their 'Adjacent to ground?' Check box.

Andy
------------------------------------------------------------------
Andy Tindale, DesignBuilder Software Ltd.
Palace Chambers, 41 London rd, Stroud,
Gloucestershire, GL5 2AJ, UK
Tel: +44 (0) 1453 755500
Email: andy@xxxxxxxxxxxxxxxxxxx
Web: www.designbuilder.co.uk
------------------------------------------------------------------

-----Original Message-----
From: EnergyPlus_Support@xxxxxxxxxxxxxxx
[mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx]On Behalf Of dust_broom
Sent: 26 July 2005 10:08
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Ground levels


Hi everyone!

I'm using DesignBuilder to do the building envelope.
Does anyone knows if its possible to do diferent ground levels?

Thank You, Emanuel




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate
folder in the Files area of the Support Web Site.

Yahoo! Groups Links










The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/